All posts by Dmitriy Nikitin

08Aug/16

707

Material:  Foam Method Used:  Cutting Depth:  Kiss & (Through) Laser Type:  CO2 Focal Length Lens:  3.75" Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples wereRead More…

08Aug/16

706

Material:  PET Method Used:  Cutting Depth:  Through Laser Type:  CO2 200W Focal Length Lens:  3.75" lens Power: ~50 Watts Frequency: 4 kHz Speed: 200mm per sec Passes: 1 The samples were cut using the 200Read More…

08Aug/16

705

Material:  Acrylic Method Used:  etch Depth:  <.002 Laser Type:  20 Watt CW Fiber Laser Focal Length Lens:  254mm Power: 40% Speed: 10 inches per second Passes: 2 Cycle Time: 50.5 seconds Samples were processed using aRead More…

08Aug/16

703

Material:  Composite Method Used:  Cutting Depth:  Through Laser Type:  CO2 Focal Length Lens:  300mm Power: 25% ~ 25 Watts Frequency: 5 kHz Speed: 25" per sec Passes: 3 Cycle Time: 0.422 seconds The samples were cutRead More…

08Aug/16

702

Material:  Copper Method Used:  etch Depth:  <.002 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 50%-98% Frequency: 20 kHz- 50 kHz Speed: 10 – 25 inches per second Passes: 2 Cycle Time:Read More…

08Aug/16

701

Material:  Plastic Method Used:  etch Depth:  <.001 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 57% Frequency: 20 kHz Speed: 20 inches per second Passes: 1 Cycle Time: 9.98 seconds Samples wereRead More…

08Aug/16

700

Material:  Steel Method Used:  etch Depth:  >.003 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 98% Frequency: 20 kHz Speed: 15 inches per second Passes: 20 Cycle Time: 1176 seconds Samples wereRead More…

08Aug/16

699

Material:  Glass Method Used:  laser marking Depth:  Surface Laser Type:  100W CW CO2 (10.6um) Focal Length Lens:  300mm Power: 10% Frequency: 5kHz modulated Speed: 500mm/sec Passes: 5 Cycle Time: 1.5sec