684
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
Material: Stainless steel and gold Power: 95% Method Used: etch Frequency: 20 kHz Depth: <.001 Speed: 10 inches per second Laser Type: 20 Watt Q-Switch FiberRead More…
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
Material: stainless steel Power: 98% Method Used: annealed Frequency: 35 kHz Depth: <.001 Speed: 5 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Read More…
Material: Stainless steel Power: 80% Method Used: laser annealing Frequency: 55kHz Depth: Surface Speed: 400mm/sec Laser Type: Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 3 Focal Length Lens: 160mm Cycle Time: 282sec Stainless steel plateRead More…
Material: Steel Power: 100% Method Used: Laser annealing Frequency: 55kHz Depth: Surface Speed: 300mm/sec Laser Type: Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 2 Focal Length Lens: 100mm Cycle Time: 104sec Sample was markedRead More…
The part was marked using a 20Watt Fiber Laser Marking System
Leather cutting for shoe patterns: The leather for this pair of ladies shoes was laser cut.
Laser engraving / burning wood model and or serial numbers on Cabinet doors and drawer faces. 30 W @ 100% and 100-150 mm/sec. Various size cabinet doors were laser marked using the FantomRead More…
The part was laser marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. Process Parameters: Material: Aluminum Power: 12 Watts Method used: Surface Etch Frequency: 25Read More…
Glass marking was done using a CO2 laser system. The image was pulled from a photo of a tiger. The application processing produced a high quality glass etched product.
All three different wood parts were marked with the same parameters. Markings No.1 and No.2 (green numbers on the picture above) are different only in sizes and, therefore, in cycle times. MarkingRead More…
Medical Device Marking: The part was laser marked using a 20-watt q-switched ytterbium fiber laser with a 420 mm focal length lens, having a working distance of 493mm. Gloves were used toRead More…
Large format metal laser cutting detail: This sheet of metal was laser cut using the SBM1200FL; equipped with a fiber laser. Please contact us for more information.
Laser cutting of the dashboard inset shapes was done at a low cutting speed to improve edge quality. The sample could be cut at a much faster speed but at the sacrificeRead More…
Laser marking of the tool steel was accomplished with a 20 Watt fiber laser marking system. The tool steel was marked with dark marks, duplicating the example pieces sent to us. The part wasRead More…
Laser cutting and aluminum sheeting to produce a very detailed Florida cut-out. The cut-out was also laser marked with a company logo.