Laser marking of wooden door frames using a CO2 laser. Marked text was reorganized into 2 lines, so it could fit into single working field of the recommended system (which is about 200x200mm). Other systems could be design with a larger marking area.  All four different wood parts were marked with the same parameters and produced excellent marks.

Sample Name: Doors Working Distance: 300mm
Material: Different wood types Power: 100% (100W)
Method Used: Laser marking Frequency: CW-mode
Depth: Not measured Speed: 600mm/sec
Laser Type: 100W CW CO2 laser Passes: 1
Focal Length Lens: 300mm Cycle Time: 2.8sec