These are POSTS that show up on the /laser-applications

08Aug/16

705

Material:  Acrylic Method Used:  etch Depth:  <.002 Laser Type:  20 Watt CW Fiber Laser Focal Length Lens:  254mm Power: 40% Speed: 10 inches per second Passes: 2 Cycle Time: 50.5 seconds Samples were processed using aRead More…

08Aug/16

707

Material:  Foam Method Used:  Cutting Depth:  Kiss & (Through) Laser Type:  CO2 Focal Length Lens:  3.75″ Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples wereRead More…

08Aug/16
laser cutting acrylic sample

709

Material:  Acrylic with protection tape Method Used:  laser cut Depth:  Through Laser Type:  250W CW CO2 laser Focal Length Lens:  5′ Power: 100% (250W average) Frequency: 10kHz modulated Speed: 250mm/sec Passes: 1 Sample was cutRead More…

08Aug/16

695

Material: Titanium Method Used: Annealing Depth: Surface Laser Type: Pulsed Fiber Focal Length Lens: 160mm Power: 95% Frequency: 30 kHz Speed: 1″ per sec Passes: 12 Cycle Time: 26.52 seconds The samples were processed using theRead More…

08Aug/16

696

Material:  Carbon Pieces – 2nd Trial Method Used:  Etch Depth:  <.002 Laser Type:  20 watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 100% Frequency: 20kHz Speed: 10 inches per second Passes: 9 Cycle Time: 57Read More…