Laser etching on carbide

Process Parameters: Blacklite Wheel

Material: Carbide
Power: Etch: 9 Watts
Engrave: 10 Watts
Method used: Etching and Engraving
Frequency: Etch: 30kHz
Engrave: 35 kHz
Depth: Surface
Speed: Etch: 10 inch/sec
Speed: Engrave: 7 inch/sec.
Laser Type: Q-Switched Fiber Laser
Focal Length Lens: 160mm
Cycle Time: Etch: 2.96 Second
Cycle Time: Engrave: 36.45 Seconds