The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were marked as dark as possible within the allotted cycle time of 4 seconds.
579
![[No fade] LPC Product Animated WEBP [No fade] LPC Product Animated WEBP](https://laserphotonics.com/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp)