Material: Chrome Plate
Power: 18 Watt
Method used: Surface Marking
Frequency: 25 kHz
Depth: Surface
Speed: 15, 20, 30 inch/sec
Laser Type: Q-Switched Fiber Laser
Focal Length Lens: 160mm
Cycle Time: Varies
The parts were marked with a 20Watt Fiber Laser Marking System using a 160 mm lens. Each of the three plates was marked with 3 sets of marks. Each plate has been labeled 1-3. .0000 Each set of marks consists of the words “ON” & “OFF” and are marked at various depths. The cycle time has been put next to each mark. Each set of marks on the plate has been labeled A, B or C. A being the shallowest mark and C being the deepest. The cycle times are as follows:
A B C
ON 6.96 sec 9.12 sec 11.27 sec
OFF 8.39 sec 10.95 sec 13.5 sec
Recommendation:
Technology: Q-switched Fiber Laser
Wavelength: 1060nm – 1070nm
Wattage: 20 Watt
Focal Length Lens: 160mm