The part was marked using a 20-watt q-switched ytterbium fiber laser with a 160mm focal length lens. The parts marked according to customer request. The alphanumeric mark IRGCO was etched onto the material using 20 watts of power, with a frequency of 50kHz, and at a speed of 35 inches per second. The final cycle time is 0.55 seconds.
254
![[No fade] LPC Product Animated WEBP](https://laserphotonics.com/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp "[No fade] LPC Product Animated WEBP")