The part was marked using the 20Watt Fiber Laser Marking System. A variety of marks were put on the part to widen the selection process while also demonstrating the fiber laser’s capabilities. Each barcode is numbered and the parameters have been recorded for each corresponding number. The marking speed was not changed for each barcode marked, just the Frequency and power. So, therefore the cycle time remained the same for each 2D code. The cycle time for each code was 4.83 seconds. A few lines of human-readable text were also marked on the part. The text had a cycle time of 4.57 seconds. A total of twelve 2D codes were marked.