Stainless steel parts were marked with a 20-watt q-switched fiber laser with a 160 mm focal length lens. The parts were deep engraved using 18 watts of power, a frequency of 20 kHz, and a speed of 5″ per second. The stamp marks on the samples the customer sent were duplicated. The total cycle time was 173 seconds.
186
![[No fade] LPC Product Animated WEBP [No fade] LPC Product Animated WEBP](https://laserphotonics.com/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp)