The aluminum was marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The part was surface etched, to create a highly contrasting mark. The part was marked at 35 inches per second using approximately 16 watts with a frequency of 35 kHz, resulting in a cycle time of 16.32 seconds.
163
![[No fade] LPC Product Animated WEBP [No fade] LPC Product Animated WEBP](https://laserphotonics.com/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp)