This medical device was marked using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The sample was etched with the information provided by the customer.

Medical Device Marking:

Material: Steel
Power: 7 watts
The method used: Etching
Frequency: 25 kHz
Depth: Surface
Speed: 15 inch/sec.
Laser Type: Q-Switched Fiber Laser
Focal Length Lens: 160mm
Cycle Time: 2.12 seconds

[No fade] LPC Product Animated WEBP

Shaping the future with Laser solutions

Ready to place an order?