by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The marks on the small spiral screw remover had 0.95 second cycle time.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The marks on the large spiral screw remover had a 1.01 second cycle time.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part were below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 10 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Two passes were needed to darken the steel with out causing too much warping of the...
