by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This aluminum tool was marked using a 20Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was laser engraved (deep engraved) according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was deep engraved according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a frequency of 25...