Drillmaster™ Custom Fiber Laser Marking System 

The Laser Tower DrillMaster™ is a custom fiber laser system built to mark multiple drill bits at a high rate. The system can be customized in many ways to handle a variety of tooling parts. With High Resolution marking capabilities, Laser Photonics’ DrillMaster™ drill marking System is the most flexible industrial-grade marking & engraving system in the 3D material processing industry designed to operate under high-vibration, shock and dust conditions

With an oversized enclosure, both circumferential marking and flat marking including UDI/UID barcodes, logos,
deep-engraving and many other Direct Part Markings are permanent, legible and non-removal.  The DrillMaster™
drill marking System incorporates Laser Photonics’ proprietary FiberScan™ C3 Software designed to
specifically run on the Window platform. The DrillMaster™ unit is configured with a 50W Fiber laser with a shuttle table and drill bit hopper to ensure the fastest throughput and highest quality mark for applications with depth
requirements > 0.003”.


The DrillMaster™ Drill marking system an industrial-grade, complete turnkey laser-based system incorporating a programmable 8” Z-axis for focal height adjustments with 2 optical X’Y’ axes increasing the range of the marking area. The DrillMaster™ system incorporates a movable Shuttle table/drill bit hopper, 50W Fiber Laser, Scan Head, Industrial PC Controller and Power Supply. The DrillMaster™ is equipped with the latest PLC servo driver and servo motors.



The key to the highest quality mark is the stable drill bit nest and directional shuttle table that continuously moves post-laser process to ensure perfect mark quality with straight & smooth walls in unmatched cycle-times. The DrillMaster™ drill marking System uses a unique combination of high energy pulses for deeper material penetration designed for high-speed removal with no re-melting of the material while performing enhanced image detailing and finesse markings.


  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front doors for operator safety
  • Oversized chamber provides working area for larger parts
  • Class 4 Laser-Rated Safety Viewing Port
  • 50W Fiber laser
  •  PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  •  Industrial-grade Extruded Frame with 19” Rack Mount Design
  •  Dual Shuttle with 24 drill bit nesting capability
  •  Exhaust outlet for Fume Extractor
  •  80 PSI Pneumatic activated front-sliding doors (optional)

Fiber Laser Superiority

  • Negligible cost of ownership in comparison with other laser types, where the
    main factor is depreciation; The laser system will last for 20 years
  • Full power control range from 1 watt to 1000 watt opens the way to cut thin
    and thick materials on the same laser system, while on other laser systems,
    power is limited to the lasing threshold and is typical from 20% to 50%
    depending on laser type
  • No beam delivery system purging and protection from contamination and
    industrial dust required
  • No maintenance or service is required on the Fiber laser making it ideal for
    24/7/365 days a year of heavy duty industrial operation
  • No laser gas, gas delivery controls, gas pumps or leakage detection required
  • No mechanical moving parts or sophisticated optical components
  •  No resonators to maintain, check or align
  • No optical components to clean or replace with no system realignment require