709

Material:  Acrylic with protection tape Method Used:  laser cut Depth:  Through Laser Type:  250W CW CO2 laser Focal Length Lens:  5′ Power: 100% (250W average) Frequency: 10kHz modulated Speed: 250mm/sec Passes: 1 Sample was cutRead More…

698

Material:  Black Polypropylene Method Used:  Etch Depth:  <.001 Laser Type:  20 watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 30 – 100% Frequency: 20kHz Speed: 26 – 60 inches per second Passes: 1 Cycle Time:Read More…

Laser cutting cardboard application

Material:  Cardboard Method Used:  Laser Cutting Depth:  Through Laser Type:  CO2 Focal Length Lens:  5″ Power: 200 Watts Frequency: 1-10 kHz (Modulated) Speed: 20-50mm Passes: 1 The samples were cut using the SBM 1200FL cuttingRead More…

699

Material:  Glass Method Used:  laser marking Depth:  Surface Laser Type:  100W CW CO2 (10.6um) Focal Length Lens:  300mm Power: 10% Frequency: 5kHz modulated Speed: 500mm/sec Passes: 5 Cycle Time: 1.5sec

700

Material:  Steel Method Used:  etch Depth:  >.003 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 98% Frequency: 20 kHz Speed: 15 inches per second Passes: 20 Cycle Time: 1176 seconds Samples wereRead More…

701

Material:  Plastic Method Used:  etch Depth:  <.001 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 57% Frequency: 20 kHz Speed: 20 inches per second Passes: 1 Cycle Time: 9.98 seconds Samples wereRead More…

702

Material:  Copper Method Used:  etch Depth:  <.002 Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 50%-98% Frequency: 20 kHz- 50 kHz Speed: 10 – 25 inches per second Passes: 2 Cycle Time:Read More…

703

Material:  Composite Method Used:  Cutting Depth:  Through Laser Type:  CO2 Focal Length Lens:  300mm Power: 25% ~ 25 Watts Frequency: 5 kHz Speed: 25" per sec Passes: 3 Cycle Time: 0.422 seconds The samples were cutRead More…

705

Material:  Acrylic Method Used:  etch Depth:  <.002 Laser Type:  20 Watt CW Fiber Laser Focal Length Lens:  254mm Power: 40% Speed: 10 inches per second Passes: 2 Cycle Time: 50.5 seconds Samples were processed using aRead More…

694

Material:  pills Power:  20% Method Used:  Etch Frequency:  30KHz Depth:  <.001 Speed:  10 inches per second Laser Type:  20 Watt Q-Switch Fiber Laser Passes: 1 Focal Length Lens:  160mm Cycle Time:  1.328sec Samples were processed usingRead More…

706

Material:  PET Method Used:  Cutting Depth:  Through Laser Type:  CO2 200W Focal Length Lens:  3.75" lens Power: ~50 Watts Frequency: 4 kHz Speed: 200mm per sec Passes: 1 The samples were cut using the 200Read More…

695

Material:  Titanium Method Used:  Annealing Depth:  Surface Laser Type:  Pulsed Fiber Focal Length Lens:  160mm Power: 95% Frequency: 30 kHz Speed: 1" per sec Passes: 12 Cycle Time: 26.52 seconds The samples were processed using theRead More…

707

Material:  Foam Method Used:  Cutting Depth:  Kiss & (Through) Laser Type:  CO2 Focal Length Lens:  3.75" Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples wereRead More…

696

Material:  Carbon Pieces – 2nd Trial Method Used:  Etch Depth:  <.002 Laser Type:  20 watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 100% Frequency: 20kHz Speed: 10 inches per second Passes: 9 Cycle Time: 57Read More…

708

Material:  Acrylic Black & (Clear) Method Used:  Cutting Depth:  Through Laser Type:  CO2 Focal Length Lens:  5.00" Power: 150 watts (200 watts) Frequency: 5 kHz Speed: 10mm/sec (5mm/sec) Passes: 1 The samples were processed usingRead More…

697

Material:  aluminum Method Used:  etch Depth:  < 3mm Laser Type:  20 Watt Q-Switch Fiber Laser Focal Length Lens:  160mm Power: 100% Frequency: 20 kHz Speed: 10 inches per second Passes: 600 Cycle Time: 10 mins SamplesRead More…

682

Material:  Chromed steel Power:  100% Method Used:  Laser annealing Frequency:  80kHz Depth:  Surface Speed:  600mm/sec Laser Type:  Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 2 Focal Length Lens:  420mm Cycle Time:   7.8sec Sample was processedRead More…

683

Material:  aluminum Power:  50% Method Used:  etch Frequency:  35kHz Depth:  <.002 Speed:  25 inches per second Laser Type:  20 Watt Q-Switch Fiber Laser Passes: 1 Focal Length Lens:  160mm Cycle Time:  15.6 seconds Sample was processedRead More…

684

Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.

685

Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.

686

Material: Stainless steel and gold   Power: 95%   Method Used: etch   Frequency: 20 kHz   Depth: <.001   Speed: 10 inches per second   Laser Type: 20 Watt Q-Switch FiberRead More…

687

Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.

689

Material: stainless steel   Power: 98%   Method Used: annealed   Frequency: 35 kHz   Depth: <.001   Speed: 5 inches per second   Laser Type: 20 Watt Q-Switch Fiber Laser  Read More…

680

Material:  Stainless steel Power:  80% Method Used:  laser annealing Frequency:  55kHz Depth:  Surface Speed:  400mm/sec Laser Type:  Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 3 Focal Length Lens:  160mm Cycle Time:  282sec Stainless steel plateRead More…

681

Material:  Steel Power:  100% Method Used:  Laser annealing Frequency:  55kHz Depth:  Surface Speed:  300mm/sec Laser Type:  Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 2 Focal Length Lens:  100mm Cycle Time:  104sec   Sample was markedRead More…

636

Process Parameters: Small Parts – Dark Coating, Light Etch Material: Steel Power: 17 Watt Method used: Etching Frequency: 80 kHz Depth: Surface Speed: 3 inchsec Laser Type: Q-Switched Fiber Laser Focal LengthRead More…

671

Laser engraving of this wooden block sample was done using a 100 watt CO2 laser through a 300mm lens. Sample Name: wood brick Working Distance: 220mm Material: wood Power: 60%-98% Method Used: LaserRead More…

649

Leather cutting for shoe patterns: The leather for this pair of ladies shoes was laser cut.

626

The part was marked using a 20 Watt Fiber Laser Marking System  

660

Laser marking of a grapes image/picture on glass with a black background using a CO2 laser.

637

Process Parameters: Small Parts – No Coating, Anneal Material: Steel Power: 7 Watt Method used: Anneal Frequency: 35 kHz Depth: Surface Speed: 10 inchsec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mmRead More…

672

Laser engraving of this wooden block sample was done using a 100 watt CO2 laser through a 300mm lens. Sample Name: wood brick Working Distance: 220mm Material: wood Power: 60%-98% Method Used:Read More…

650

Glass marking was done using a CO2 laser system. The image was pulled from a photo of a tiger. The application processing produced a high quality glass etched product.

627

The part was marked with a 20 watt Q-switched Ytterbium fiber laser and 160 mm focal length lens. The sample was ablated with the information provided by customer to create a niceRead More…

661

Laser marking of palm trees image/picture on glass with a black background using a CO2 laser.

638

Process Parameters: Abrasive Core Material: Darker – Etching Material: Lighter – Engraving Power: Etch: 9 Watts Power: Engrave: 10 Watts Method used: Etching & Engraving Frequency: Etch: 30kHz Frequency: Engrave: 35 kHzRead More…

673

A UID data matrix with 3mil data cell size was laser marked on polished stainless steel stock. The mark produced had excellent contrast. Total mark time was 0.5 seconds. A 20 Watt CW Fiber laser was used toRead More…

651

Large format metal laser cutting detail: This sheet of metal was laser cut using the SBM1200FL; equiped with a fiber laser. Please contact us for more information.

628

The samples were marked using a 20 watt Q-switched Fiber Laser using a 160 mm lens. The Colt logo (vector graphic) was annealed using 15 Watts of power, frequency of 80 kHz,Read More…

662

Laser marking of a butterfly photo on glass with a black background using a CO2 laser.    

639

This abrasive core material was laser etched. Process Parameters: Abrasive Core Material: Abrasive Core Power: 7 Watts Method used: Etching Frequency: 20 kHz Depth: Surface Speed: 10 inch/sec. Laser Type: Q-Switched FiberRead More…

674

UID marking a two-dimensional data matrix with 3mil data cell size was marked on polished plate stainless steel stock. The mark produced had excellent contrast. Total marking time was 0.6 seconds. A 20 Watt CWRead More…

652

Laser cutting an aluminum sheeting to produce a very detailed Florida cut-out. The cut-out was also laser marked with a company logo.  

629

The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth:Read More…

663

Laser etching or marking of a crane vector image onto glass using a CO2 laser.    

640

Laser etching on carbide Process Parameters: Blacklite Wheel Material: Carbide Power: Etch: 9 Watts Engrave: 10 Watts Method used: Etching and Engraving Frequency: Etch: 30kHz Engrave: 35 kHz Depth: Surface Speed: Etch: 10Read More…

675

  Sample Name: "Dallas national golf club" logo Working Distance: 175mm Material: Stainless steel Power: 100% (20W average) Method Used: Laser marking Frequency: 20kHz Depth: ~0.3mm Speed: 300mm/sec Laser Type: Pulsed fiberRead More…

619

This part was marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was surface etched, to create contrasting marks. Material: Carbide Steel Method used: SurfaceRead More…

653

Laser cutting of this sawtooth was created using the SMB1200FL fiber laser cutting system.

630

A laser etched aluminum tool Process Parameters: Material: Aluminum Power: 12 Watts Method used: Surface Etch Frequency: 25 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens:Read More…

664

Laser marking of a simple flower pattern onto glass with a mirrored background using a CO2 laser (mirror laser marking).    

641

The parts were engraved with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The marks were done at 3 different depths using 2 passes, 4 passes andRead More…

676

  Sample Name: "Crowne plaza Invitational" logo Working Distance: 175mm Material: Stainless steel Power: 100% (20W average) Method Used: Laser marking Frequency: 20kHz Depth: ~0.3mm Speed: 300mm/sec Laser Type: Pulsed fiber laserRead More…

620

The part was marked using a 20 watt q-switched ytterbium fiber laser with 160mm focal length lens. The small and medium drill bits were surface annealed at approximately 17 watts of power,Read More…