The part was marked using a 20-watt q-switched ytterbium fiber laser marking system with a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. 10 watts of power were used to mark the sample, with a frequency of 35 kHz and a speed of 15 inches per second. A logo and text were etched on the sample. The cycle times for the marks were 2.84 seconds and 1.52 seconds for the logo and the text respectively.

[No fade] LPC Product Animated WEBP

Shaping the future with Laser solutions

Ready to place an order?