Laser Cutting Other

Laser Cutting Other Application #703

Process: Laser Cutting
Material: Other
Industry: Aerospace

Detailed Application View

 

Application Details:

Material:  Composite
Method Used:  Laser Cutting
Depth:  Through
Laser Type:  CO2
Focal Length Lens:  300mm
Power: 25% ~ 25 Watts
Frequency: 5 kHz
Speed: 25" per second
Passes: 3
Cycle Time:
0.422 seconds

The samples were cut using the F100 CO2 OEM laser marking system equipped with a 300 mm lens. 3 passes were used to make the cut rather than 1 slower pass, this was done to potentially reduce the amount of char and burning produced from the laser. The sections that are cut have been labeled 1-2 and 3-4. The numbers have been placed near to the edge that was cut by the laser.

 

Recommended Laser Systems:

CO2 Laser MarkingCO2 Laser - OEM Marking Kit

The Fantom SP laser Marking Kit is the most advanced and fastest Wave Guide CO2 laser marking system available today for integration into production lines, marking, perforating and pharmaceutical equipment.

The F30SP is air cooled, completely sealed, and maintenance free OEM product with PC based DSP controller, mounting hardware, and robust marking software with an easy-to-use graphical user interface.

Application Search:
START HERE!
Laser Cutting Videos
View the latest laser cutting
videos on our laser videos page.
Try Before You Buy
Send us your samples. We’ll process them, give you a detailed report and our equipment recommendations at no charge.


i-Series Fiber Laser Marking Kit

Highlighted Application:


Application #641
Process: Laser Engraving
Material: Graphite

 

Español | Русский | Contact Us | Site Map
The forerunner in developing hi-tech CO2 and fiber laser marking, laser cutting and laser engraving machines and equipment.
Copyright © 2010 Laser Photonics, LLC