Laser Marking Wood

Application #666

Process: Laser Marking
Material: Wood
Industry: Manufacturing

Detailed Application View

Application Details:

All three different wood parts were marked with the same parameters. Markings No.1 and No.2 (green numbers on the picture above) are different only in sizes and, therefore, in cycle times. Marking No.1 is done in 1.0 seconds, No.2 is done in 0.75 seconds.

Sample Name:	Wood pieces	Working Distance:	300mm
Material:	Different wood	Power:	100% (100W)
Method Used:	Laser marking	Frequency:	CW-mode
Depth:	Not measured	Speed:	500mm/sec
Laser Type:	100W CW CO2 laser	Passes:	1
Focal Length Lens:	300mm	Cycle Time:	1.0sec / 0.75sec

Recommended Laser Systems:

CO2 Laser Cutting & Engraving Machine

The SBM 1200M laser cutting and laser engraving machine comes equipped with CO2 laser combining flying optics with a precision Direct Drive motion system. CO2 laser equipped system provides highly accurate cutting, welding, engraving and marking capabilities for multiple materials.

CO2 Laser - OEM Marking Kit

The Fantom SP laser Marking Kit is the most advanced and fastest Wave Guide CO2 laser marking system available today for integration into production lines, marking, perforating and pharmaceutical equipment.

The F30SP is air cooled, completely sealed, and maintenance free OEM product with PC based DSP controller, mounting hardware, and robust marking software with an easy-to-use graphical user interface.