Laser Engraving Steel

Application Details:

Material: Silver plated 416 SS
Power: 20 Watt
Method used: Engraving
Frequency: 40kHz

Since there was not a rotary indexer configured at the time during the processing of this application, the most feasable solution was to rotate the parts by hand. The total marking area was broken into 3 sections. The 3 sections were all marked with the same parameters but did have different cycle times. The first part of the mark took only 0.96 seconds with the middle part taking only 0.79 seconds and the last part of the mark taking a 0.74 seconds to lase. Giving the total laser marking a time of 2.46 seconds. This laser marking time does not include the 2 rotations needed to complete the mark.

Technology: Q-switched Fiber Laser
Focal Length Lens: 160mm

Recommended Laser Systems:

Fiber Laser Engraving Machine

Fiber Tower™ Series is the new generation of Fiber Laser Material Processing Systems for Direct Parts Marking, UID Marking (Unique Identifier), and Deep Engraving. It is the most advanced, compact, industrial grade, mid size, Fiber Laser Engraving Machine available on the market. Fiber Tower™ series employs the new generation of solid state Ytterbium fiber laser systems of near infrared spectral range (1060-1080nm) with a unique combination of high peak power, ideal beam quality, fiber delivery and highest electro-optical wall-plug efficiency

These laser machines possess a reliability that is unmatched by any other kind of solid state or gas laser systems. Wide selectivity of operating wavelengths, ultra-low amplitude noise, high stability and ultra-long pump diode lifetime complete an impressive list of advantages of these modern fiber laser systems.

Fiber Laser Marking Kit

The i-Series Fiber Laser Marking Kit was specifically designed for maintenance-free OEM applications.  It delivers a diffraction limited (M2<1.05) laser beam directly to the worksite via a metal sheathed single mode fiber cable.

These compact service-free lasers are designed to operate under high shock, vibration and dust conditions, with relatively high humidity and temperatures. They do not require routine replacement parts or materials. Wall-plug efficiencies up to 50% result in a compact size, reduced utilities, and trouble-free air cooling.

Fiber-to-fiber architecture means a robust, monolithic design with no optics to align or maintain, no mechanics to stabilize, and with the focusable power and high power densities needed for the most demanding applications. One cable connection makes it easy to integrate into any laser marking and engraving system.